Sony VPL-FX37

 Brilliant colour performance with high resolution lens

The VPL-FX37 combines a new‑generation optical system, which uses Sony?s BrightEra? with Long Lasting

Optics technology, and a 3LCD projection system to achieve high picture quality in XGA (1024 x 768)

resolution and high brightness (6,000 lumens). The VPL-FX37 incorporates a high resolution lens known as

the All Range Crisp Focus (ARC-F) lens. Its large diameter and fine pitch ensure crisp pictures.

12-bit 3D gamma correction, I/P conversion and film mode

The VPL-FX37 Series projector incorporates 12-bit 3D gamma correction circuitry to perform highly accurate

gamma correction, achieving smoother gradations and a richer grey scale. The video signal processing

technology that Sony has incorporated in the VPL-FX37 offers I/P conversion and 2-3 pull-down to generate

high-quality images with outstanding clarity.

Convenient, simple projector replacement

The standard 1.6x zoom lens enables installation flexibility when replacing an existing projector with the VPL-

FX37 ? there?s no need to change ceiling mount positions. For applications where more than a standard lens is

needed, the VPL-FX37 is compatible with the optional VPLL-Z1024 and VPLL-Z1032 accessory lenses

designed for Sony?s current VPL-FX40 Series.

?Blend-in? design

The VPL-FX37 showcases a low-profile chassis, so the projector appears to blend into the ceiling or wall on

which it is mounted. The connector panel is located on the front of the unit so that its cables cannot be seen by

the audience.

Long-lasting lamp and energy saving design

By incorporating high-performance lamp and advanced lamp-control technology, the VPL-FX37 offers a

recommended lamp replacement time of approximately 3,500 hours (in standard mode). The VPL-FX37 offers

low power consumption, allowing users to make significant savings on their electricity expenses. With a single

push of the ECO MODE key on either the projector or the supplied Remote Commander? unit, user can

select an energy-saving setting from the ECO Mode menu.

Lamp and filter synchronised maintenance

When the air filter must be cleaned, a timely message is displayed on screen. The lamp and the filter are

accessible from the same side, so their maintenance can be performed without uninstalling the projector. With

typical usage, the filters have an approximate 15000-hour cleaning cycle. This is achieved by a Quad Filter

system which means the filters only need to be clean when the lamp is changed, even in harsh conditions,

saving maintenance time and cost.

Centred lens design

The centred lens provides symmetry for a balanced installation, and makes setup very simple.

Lens Shift function

The VPL-FX37 has Lens Shift function, which is controlled from the projector control panel or the supplied

Remote Commander unit. Using this function, the position of the projected image can be moved vertically by

up to 51% and horizontally from -33% through to +33%. Images can be easily adjusted to the desired settings

during installation.