Even with its light, compact body, the PT-EZ570 Series produces brightness of up to

6,000 lm.* In addition, the iris automatically adjusts itself to match the situation,

resulting in high contrast ratio of up to 5,000:1.

The PT-EX600 has 6,000 lm, PT-EW630 5,500 lm, PT-EZ570/EX500 5,000 lm, and PT-EW530 has

4,500 lm of brightness.
For the PT-EZ570/EW630/EX600. The PT-EW530 and PT-EX500 has 2,000:1 contrast ratio.

Panasonic?s Daylight View Basic technology

achieves sharp, easy-to-see images by clearly

reproducing the details in dark image areas, which

were previously difficult to see in brightly lit rooms.

A built-in sensor measures the ambient light, and

the Daylight View Basic function adjusts the

halftone color and brightness level according to the

surrounding illumination.

The cabinet is designed with a straight airflow path, from intake to exhaust. 
The shielding of the lens section, where dust is likely to enter, has been further

improved to keep dust out. And the sealing performance of the air filter unit and air

intake duct has been increased to prevent the entry of dust from the filter periphery,

resulting in a highly dust-resistant structure.

The Eco Filter unit, which efficiently captures dust in the intake airflow path, requires

no replacement for up to12,000 hours.* This large, pleated Micro Cut Filter

(electrostatic filter) uses an ion effect to trap minute dust particles, further raising the

overall dust-trapping capability.

These features minimize the entry of dust into the optical block and maintain

brightness over a long period of time, while reducing the hassle of maintenance.

Also, in addition to achieving a long replacement cycle, the Eco Filter can be washed

with water** and reused as an environmental consideration.

The usage environment affects the duration of the filter.
When washing with water, please follow the procedures listed in the operating instructions. Also,

we recommend replacing the filter with a new one after it has been washed and reused twice. If the

filter is not sufficiently clean after washing, replace it with a new one.

When the lamp power is set to Auto, the Intelligent Lamp Control

system automatically adjusts the lamp output in accordance with the

brightness of the projected image and reduces it by up to 70 %.* It

also combines with color shift correction, which corrects the shift in

the color balance that occurs when the lamp output drops. As a result,

power consumption is effectively reduced while excellent color

reproduction is maintained.

A number of functions are provided to reduce

power consumption. They adjust the brightness

according to ambient light conditions, and reduce

the lamp power when there is no signal input or the

projector is in AV Mute mode*. You can easily set

the Eco Management functions according to

operating conditions by using the ECO button on

the remote control.

The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility during installation. It lets you

easily make adjustments with the remote control. The unit can also be rotated 360 degrees vertically. This means you can install it at any angle

you want, to accommodate different installation conditions

Choose from a wide lineup of optional lenses for your system,

including short-throw, long-throw zoom and fixed-throw lenses

for rear projection use. The additional lenses make it easy to

adapt your projector to the installation site. The lenses attach

and detach with one-touch ease.

Web browser on a computer connected

through a LAN system lets you remotely

operate projectors and check their status. An

e-mail messaging function can also notify you

when a lamp needs replacement, and indicate

the overall projector status.

In addition, Multi Projector Monitoring and

Control Software is available for monitoring

and controlling multiple Panasonic projectors

from a single PC. 

The wired LAN terminal is compatible with

PJLink? (class1), an open protocol that is

used by many manufacturers, to enable

integrated control of systems that contain

different brands of projectors.

Two different image sources can be simultaneously

displayed onto a single screen. You can also switch

to P-in-P (Picture-in-Picture) mode and display a

sub-window onto the main screen. The sub-window

can be positioned at any of the four corners (upper

left, upper right, lower left, lower right) to expand

the usable area as only a wide-screen projector can

do.

You can change the default Panasonic start up logo to any logo you

want. A new logo can be easily uploaded by connecting a computer to

the PT-EZ570 Series through the LAN or serial connection by using

the Logo Transfer Software*. An abundance of other security

measures are also included, such as a security bar, Key lock,

and PIN code lock function. This is very effective for preventing theft.